Mazda CX-3 Front Brake Pads 2016–2020 B6YS3328ZB

Mazda CX-3 front brake pads are installed in the brake calipers on the front wheels, where they create friction against the brake discs when the driver applies the brakes. These components play an important role in slowing the vehicle, helping it respond steadily and supporting driver control in a range of traffic conditions.

Because they are regularly exposed to friction and high temperatures, brake pad friction material gradually wears over time. If the pads become excessively worn, braking performance may decrease, and the risk of damage to the brake discs or noise when braking may increase.

Front brake pads part number B6YS3328ZB are listed for the 2016–2020 Mazda CX-3. When replacing them, inspect the brake discs and calipers, and check the part number to select the correct brake pad set for your vehicle’s version.

Product Information

• Product name: Front Brake Pads

• Part number: B6YS3328ZB

• Brand: Genuine

• Vehicle: Mazda CX-3

• Model years: 2016–2020

• Installation position: Front brake assemblies on both wheels

• System: Brake system

• Part type: Disc brake pads

• Condition: New

Function and Role

Front brake pads create friction against the brake discs through pressure from the brake caliper pistons. This friction slows the rotation of the wheels and works with the rear brakes to control deceleration and bring the vehicle to a stop.

Key functions include:

• Creating the friction needed to slow the wheels.

• Supporting vehicle control when braking in different traffic conditions.

• Working with the brake discs and calipers to maintain braking performance.

• Helping the vehicle stop steadily when related components are functioning properly.

Key Benefits

• Part number B6YS3328ZB helps identify front brake pads for the Mazda CX-3.

• Helps restore friction when the old brake pads have worn to their limit.

• Supports steady deceleration when the correct type is installed properly.

• Suitable for servicing the front brake system based on actual wear and use.

Signs You May Need an Inspection or Replacement

Have the front brake pads inspected if you notice any of these signs:

• A squealing or metallic noise when applying the brakes.

• Friction material worn close to or below the permitted limit.

• Reduced braking performance or an unusual change in brake pedal travel.

• Vehicle vibration when braking or uneven pad wear from side to side.

• The brake warning light comes on, if the vehicle is equipped with a related warning system.

These signs may also be caused by the brake discs, calipers, or other components. Inspect the entire brake system before determining which part needs replacement.

Replacement Recommendations

• Check brake pad thickness and the condition of the brake disc surfaces.

• Replace the brake pads as a set on both front wheels.

• Inspect the pistons, slide pins, and other related brake caliper components.

• Install according to the correct procedure and bed in the brakes as directed.

• Test braking performance and confirm the system is operating steadily before driving.

Check Fitment Before Ordering

Brake configurations on the Mazda CX-3 may vary by vehicle version and market. Before ordering front brake pads part number B6YS3328ZB, provide the VIN or the number on the old brake pads for a parts catalogue check to help identify the correct part for your vehicle.