Genuine Ford Transit Main Bearing 2011-2020 2S7Q6330A1A

Genuine Ford Transit 2011-2020 main bearing part number 2S7Q6330A1A is an important component in the engine crankshaft system, designed to support and locate the crankshaft while reducing friction between the crankshaft and engine block.

During operation, the crankshaft rotates at high speed and carries heavy loads. The main bearing acts as an intermediate cushioning layer that helps maintain a stable lubricating oil film, reduce metal-to-metal friction, and minimize wear. When the main bearing is worn or damaged, it can lead to low oil pressure, engine knocking, and serious damage to the crankshaft.

The 2S7Q6330A1A main bearing is manufactured to genuine standards, ensuring high precision, perfect compatibility with Ford Transit models from 2011 to 2020, and direct-fit installation with no modifications or complex technical intervention required.

The bearing material offers high load capacity, excellent heat resistance, and effective wear protection, helping maintain crankshaft stability, extend engine life, and ensure long-term operating performance.

Product information

• Product name: Main Bearing (Main Bearing / Crankshaft Bearing)
• Part number: 2S7Q6330A1A
• Standard: Genuine Ford
• Applicable vehicle line: Ford Transit 2011–2020
• System: Engine – Crankshaft
• Installation location: Crankshaft journal (inside the engine block)
• Condition: New

Functions and role

• Supports and locates the crankshaft
• Reduces friction between the crankshaft and engine block
• Maintains lubricating oil pressure
• Helps limit wear on engine components
• Helps the engine run smoothly and quietly

Key advantages

• Genuine Ford part with high precision
• Correct fit for Transit 2.2 engines
• High load capacity and strong heat resistance
• Effectively reduces friction
• Direct-fit installation with no modifications

Signs it needs replacement

• Abnormally low oil pressure
• Loud knocking noise from the engine
• Strong engine vibration
• Metal shavings in the engine oil
• Scratched or worn crankshaft

👉 Main bearing failure is often caused by insufficient lubrication, dirty oil, or prolonged engine operation under heavy load.

Replacement recommendations

• Check and measure the crankshaft
• Replace with fresh oil and an oil filter
• Clean the lubrication system
• Install in the correct position and tighten to standard torque