Genuine Ford Rear Differential Bearing Shim for Ranger Everest 2013-2022 EB3G4067AA

Genuine Ford Rear Differential Bearing Shim for Ranger Everest 2013-2022 EB3G4067AA is a specialized part in the rear differential assembly, used to position the differential bearings, set preload, and establish the correct mesh between the ring gear and pinion gear according to the manufacturer’s technical specifications. This is an important component that helps the differential operate stably, reduce noise, and extend drivetrain service life.

On Ford Ranger and Ford Everest models from 2013-2022, the differential bearing shim is installed at the rear differential bearing location and works with the bearings, differential housing, ring gear, and pinion gear to ensure the gear mesh clearance and preload always meet the correct technical specifications. Accurate adjustment helps the rear axle operate smoothly, transmit torque efficiently, and limit gear wear or bearing damage.

This genuine Ford shim is made from high-strength alloy steel with very high machining precision, an absolutely flat surface, and original standard thickness. Each shim is manufactured to strict tolerances to ensure differential backlash adjustment achieves optimal accuracy during assembly and repair.

During rear axle overhaul, differential bearing replacement, or drivetrain service, choosing the correct shim is mandatory. If the wrong thickness is used or installation is not performed to the correct technical standard, the differential assembly may produce whining noise, vibration, abnormal heat, and cause rapid gear wear or reduced bearing life.

Genuine Ford part EB3G4067AA is produced to original specifications, ensuring high accuracy, strong load capacity, and full compatibility for Ford Ranger and Ford Everest models from 2013-2022.

Product information

• Product name: Rear Differential Bearing Shim / Rear Differential Bearing Shim
• Part number: EB3G4067AA/ EB3Z4067A/ EB3Z4067B
• Brand: Genuine Ford
• Vehicle line: Ford Ranger, Ford Everest
• Model years: 2013-2022
• Installation location: Rear differential assembly
• System: Rear-wheel drivetrain
• Condition: New

Functions and role

• Aligns differential bearing position
• Sets bearing preload
• Ensures precise meshing of the axle gear set
• Reduces rear axle noise and vibration
• Helps extend the life of bearings and differential gears

Key advantages

• High-quality genuine Ford part
• Machined with high precision
• Load-bearing alloy steel with good resistance to deformation
• High durability in harsh operating conditions
• Accurate fit, fully compatible with the original rear axle

Signs it needs inspection or replacement

• Rear differential assembly overhaul or repair
• Replacing differential bearings
• Replacing the ring gear and pinion set
• Rear axle produces unusual whining or vibration
• Need to reset differential clearance and preload to technical standards

👉 The rear differential bearing shim is a high-precision technical part that directly affects how the differential assembly works. Using genuine Ford part EB3G4067AA helps ensure correct gear mesh, reduce noise, increase bearing and gear durability, and maintain optimal driveline performance.

Replacement recommendations

• Replace with the correct EB3G4067AA part number according to rear axle specifications.
• Measure and adjust preload and gear backlash using specialized tools in accordance with Ford standards.
• Inspect the differential bearings, ring gear, pinion gear, and rear axle seal at the same time.
• Change the rear axle oil after assembly if needed.
• Prioritize genuine Ford parts to ensure accuracy, durability, and long-term stable operation.