Front Brake Dust Boot (1 Wheel) for Ford Ranger 2013–2021 – UCYR3365X

Front brake dust boot is a rubber or elastomer component used in the brake assembly to protect the sealing area and help keep road dust, water, and other contaminants away from internal parts. Its condition is important for keeping the brake assembly clean and operating reliably.

Over time, the dust boot may harden, crack, tear, or deform due to heat and operating conditions. If the boot is damaged, dust and moisture can get inside, increasing the risk of corrosion or affecting the operation of related brake components.

Part number UCYR3365X is used to look up the front brake dust boot for 2013–2021 Ford Ranger models. The product is for one wheel. Before replacement, identify the correct installation position and check the brake assembly configuration for your vehicle version.

Product Information

• Product name: Front Brake Dust Boot

• Part number: UCYR3365X

• Brand: OEM

• Vehicle: Ford Ranger

• Model years: 2013–2021

• Installation location: Front brake assembly, 1 wheel

• System: Braking system

• Part type: Dust boot

• Quantity: 1 piece per wheel

• Condition: New

Function and Role

The dust boot protects the sealing area of the brake assembly, helping prevent contaminants from the surrounding environment from entering moving components or sealing surfaces.

Key functions include:

• Helps keep dirt and moisture out of the protected area.

• Helps keep internal brake assembly components clean.

• Helps reduce the risk of damage from accumulated contaminants when the dust boot is intact.

• Helps maintain the durability of related sealing components and brake mechanisms.

Key Features

• Part number UCYR3365X helps identify the correct part for 2013–2021 Ford Ranger models.

• Suitable for replacing a torn, hardened, or deformed dust boot once the application has been confirmed.

• Supplied as 1 piece per wheel, making it easier to determine the quantity needed for the repair.

• Helps protect internal brake assembly components when installed in the correct position and the correct type is used.

Signs to Check or Replace the Dust Boot

Inspect the front brake dust boot if you notice any of the following:

• The rubber is cracked, torn, or deformed.

• The dust boot has come out of its installed position.

• Dirt, moisture, or signs of corrosion are present in the protected area.

• Brake fluid is leaking, or related sealing components are damaged.

If brake fluid is leaking, the brakes are binding, or braking force is abnormal, inspect the entire brake assembly rather than replacing only the dust boot. Do not continue driving if the braking system shows signs of being unsafe.

Replacement Recommendations

• Confirm the exact position of the dust boot to be replaced in the front brake assembly.

• Inspect the piston, cylinder, seals, and related components for signs of damage.

• Clean the installation surface and use the correct tools and repair procedures.

• If the hydraulic system needs to be opened, bleed the system and check for leaks according to the repair instructions.

• Check brake operation before returning the vehicle to service.

Check Fitment Before Ordering

To select the correct UCYR3365X front brake dust boot for a 2013–2021 Ford Ranger, provide the VIN or the part number from the old part for a catalog lookup. Also confirm the brake assembly configuration and installation position to ensure the part is suitable for your vehicle.