10R80 Automatic Transmission Oil Pump for Ford Ranger and Everest 2018–2025 HL3Z7A130B

10R80 Automatic Transmission Oil Pump for Ford Ranger and Ford Everest, part number HL3Z7A130B (Automatic Transmission Oil Pump) is part of the hydraulic system in the 10-speed automatic transmission. The oil pump creates the flow and hydraulic pressure needed to help the transmission's internal components operate as required.

During operation, transmission fluid is circulated to lubricate, help cool, and provide pressure to the shift control components. If the oil pump is worn or damaged, fluid pressure may not meet requirements, affecting shifting and transmission operation.

In the Ford parts catalog, part number HL3Z7A130B is listed as an oil pump for the torque converter in the 10R80 automatic transmission. Therefore, confirm the exact location and design of the pump assembly being replaced to avoid confusing it with other oil pumps or support assemblies in the transmission. 

Product Information

• Product name: Automatic Transmission Oil Pump

• Part number: HL3Z7A130B

• Replacement part number: HL3P7G033AC

• Brand: Genuine

• Vehicle models: Ford Ranger, Ford Everest

• Model years: 2018–2025

• Transmission: 10-speed automatic 10R80

• Installation location: Automatic transmission assembly

• System: Transmission hydraulics and lubrication

• Part type: Transmission oil pump

• Condition: New

Function and Role

The transmission oil pump creates fluid flow and hydraulic pressure for the components inside the automatic transmission. Depending on its installation location, the pump may supply fluid to specific transmission components.

This component helps to:

• Create fluid flow for the transmission hydraulic system.

• Provide oil pressure to operating components as designed.

• Lubricate moving parts inside the transmission.

• Support proper shifting when oil pressure meets requirements.

• Help limit damage caused by insufficient fluid or inadequate oil pressure.

Key Features

• Part number HL3Z7A130B is provided for reference during parts searches.

• Can be used to check replacement requirements for the 10R80 automatic transmission oil pump.

• Helps maintain hydraulic system operation when the correct part is selected.

• Helps identify the required replacement part based on the part number and actual transmission configuration.

• Related part numbers can be checked against the Ford parts catalog before ordering.

Signs It May Need Inspection or Replacement

• The transmission shifts slowly or slips.

• Unusual noises or sensations occur during shifting.

• The transmission operates inconsistently as the vehicle accelerates.

• Measured transmission fluid pressure is outside specifications.

• Transmission fluid appears low, is leaking, or is contaminated.

• The transmission displays fault codes related to hydraulic pressure or shifting operation.

These symptoms may be caused by the oil pump, fluid level, filter, valve body, clutch assembly, or other components. Diagnose the transmission and check oil pressure according to the relevant service procedure before determining that the pump has failed.

The 10R80 automatic transmission oil pump for Ford Ranger and Ford Everest, part number HL3Z7A130B, is an important component of the transmission's hydraulic operation. Identifying the correct pump and part number helps reduce errors during repairs and supports operation as designed.

Replacement Recommendations

• Check part number HL3Z7A130B against the parts catalog using the VIN.

• Confirm the correct pump type and installation location in the 10R80 transmission.

• Inspect the transmission fluid, filter, and related fluid passages.

• Inspect internal transmission components for signs of wear or damage.

• Use the correct transmission fluid and follow the technical installation procedure.

• Check oil pressure and shifting operation after the repair.

Check Compatibility Before Ordering

Customers should provide the VIN or the part number on the old pump assembly so Phụ Tùng Phong Thịnh can help verify the match. Compatibility depends on the vehicle year, version, production date, and transmission configuration.

Verify part number HL3P7G033AC separately before using it as a replacement part number for HL3Z7A130B, to ensure the two numbers correspond to the same part.