Left Engine Mount for Ford Ranger & Mazda BT50 2013-2020 2.2 Genuine - AB3Z6038W

Left Engine Mount (LH) for Ford Ranger & Mazda BT50 2013–2020 2.2 Genuine – AB3Z6038W

Left Engine Mount (LH) for Ford Ranger & Mazda BT50 2.2 Genuine – AB3Z6038W is an important part of the engine mounting system. This component is responsible for securing the engine, reducing vibration, and minimizing noise, helping the vehicle run smoothly and steadily while extending the service life of parts such as the transmission, chassis, and engine bracket.

The product is manufactured to Ford Motor Company genuine standards, ensuring durability, precision, and high load-bearing capacity, and is fully compatible with Ford Ranger and Mazda BT50 2.2 models from 2013–2020.

Functions and role of the engine mount

• Secures the engine to the vehicle frame, keeping it stable during acceleration or hard braking.

• Reduces vibration and noise, limiting movement transferred into the cabin.

• Improves durability of mechanical parts, helping reduce cracks in hoses, wiring, or aging rubber components.

• Helps the vehicle run smoothly, delivering a quieter and more solid driving feel.

Key advantages

• Genuine Ford part – part number AB3Z6038W, high precision, easy to install.

• High-grade engineered rubber and steel alloy, resistant to aging, heat, and vibration.

• Standard design, fits the left engine mount position (LH) with no modification required.

• High durability and long service life, helping limit vibration, noise, and wear on related parts.

• Quick installation, fully compatible with the vehicle chassis structure.

Fits the following vehicles

• Ford Ranger 2.2L (2013–2020): XL, XLS, XLT, Wildtrak 2.2.

• Mazda BT-50 2.2L (2013–2020).
  ✅ Not applicable to the 3.2L version or 2021 and later models (due to changes in the engine mount assembly design).

Signs the engine mount is worn or needs replacement

• The vehicle vibrates strongly when starting or shifting into D/R, and the front end shakes when pulling away.

• The engine makes a knocking sound or vibrates heavily when shifting or accelerating.

• Visible cracks, sagging, or separation of the engine mount rubber from the metal bracket.

• The vehicle vibrates abnormally when idling or with the air conditioner on.

If any of the above symptoms appear, it is recommended to inspect and replace the genuine AB3Z6038W left engine mount to maintain vehicle performance, comfort, and driving safety.

Repair and replacement recommendations

• Inspect the engine mount every 40,000–60,000 km, or whenever the vehicle shows signs of vibration.

• When replacing the left engine mount, check the right engine mount and transmission mount as well to balance the load.

• Do not weld or repair an old engine mount, as this can misalign the engine, cause vibration, and reduce rubber lifespan.

• Have it replaced at a reputable garage or an authorized Ford/Mazda dealer to ensure correct torque and technical installation standards.

Benefits of using a genuine part

• High durability, with service life 2–3 times longer than generic aftermarket parts.

• Maintains proper engine balance, reducing vibration and cabin noise.

• Extends the life of the transmission, rubber mounts, and related parts.

• Smooth, stable, safe driving with long-term maintenance cost savings.