Rear Left ABS Sensor Ford Ranger Mazda BT50 2013-2020 OEM AB312C216AD

Rear Left ABS Sensor (LH) Ford Ranger / Mazda BT50 2013-2020 OEM AB312C216AD is an important part of the ABS braking system, designed to measure the rotational speed of the left rear wheel and send signals to the central control unit (ECU), helping the ABS system operate accurately.

On Ford Ranger and Mazda BT50 models from 2013-2020, the ABS sensor plays a key role in helping the anti-lock braking system work effectively, supporting better road grip, reducing wheel lockup, and improving control during hard braking or when driving on slippery roads.

Over time, the sensor may fail due to metal dust buildup, broken wiring, connector corrosion, or damage from environmental exposure and water. When this happens, the ABS warning light may stay on, braking can become less stable, or the ABS system may not function properly.

The OEM AB312C216AD product is manufactured to the correct standard for Ford Ranger and Mazda BT50, ensuring high accuracy, stable signals, and full compatibility with the vehicle's original electrical and braking system.

Product information
• Product name: Rear Left ABS Sensor / Rear Left ABS Wheel Speed Sensor
• Part number: AB312C216AD
• Brand: OEM
• Compatible models: Ford Ranger / Mazda BT50
• Model years: 2013-2020
• Installation position: Left rear wheel (LH)
• System: ABS braking system
• Condition: New

Functions and benefits
• Measures rear wheel rotational speed
• Sends signals to the ABS ECU
• Supports anti-lock braking
• Improves stability during hard braking
• Helps the vehicle maintain better traction

Key advantages
• Vehicle-specific design for Ford/Mazda
• Stable signal, high accuracy
• Compatible with the original ABS system
• High durability, built for harsh environments
• Easy to install, no modifications needed

Signs it needs replacing
• ABS warning light stays on in the dashboard
• ABS not working
• Wheel speed reading errors
• Sensor wire broken or shorted
• Reduced braking stability

👉 The ABS sensor is an important safety component and should be checked and replaced with the correct part number when signs of failure appear to ensure the braking system works accurately.

Replacement recommendations
• Replace with the correct AB312C216AD part number for proper fitment
• Check the connector and wiring before installation
• Clean the sensor location and ABS tone ring
• Clear ABS fault codes after replacement
• Use high-quality OEM parts