Ford Ranger Mazda BT-50 In-Tank Fuel Pump Assembly 2.2 3.2 2013-2018 Genuine UC2J1335XB

Genuine UC2J1335XB in-tank fuel pump for Ford Ranger, Mazda BT-50 2013-2018 2.2 and 3.2 engines is an important part of the fuel delivery system, designed to draw fuel from the tank and deliver it to the fuel system at the correct pressure. The pump helps ensure a continuous, stable fuel supply to the engine in all driving conditions, from starting and acceleration to heavy load.

On Ford Ranger and Mazda BT-50 2013-2018 models with 2.2L and 3.2L Diesel engines, the in-tank fuel pump works in sync with the fuel filter strainer, fuel lines, high-pressure pump, Common Rail injectors, fuel pressure sensor and ECU to maintain stable fuel flow. When the pump is operating properly, the engine starts quickly, accelerates smoothly, maintains stable power, and helps optimize fuel consumption.

The UC2J1335XB product is a genuine Mazda part, manufactured to high quality standards with a durable electric motor, a high-precision impeller, and materials designed to withstand the Diesel fuel environment. The pump assembly is engineered to the correct specifications, ensuring fuel flow and pressure meet manufacturer standards, with accurate installation inside the fuel tank and no modification required.

After extended use, the in-tank fuel pump may suffer motor wear, reduced pump pressure, or a clogged strainer due to fuel contamination. In that case, the vehicle may show symptoms such as hard starting, weak acceleration, sudden stalling, increased fuel consumption, or fuel system warning lights. If not replaced promptly, the high-pressure pump and injectors may be affected by an unstable fuel supply, increasing repair costs.

The UC2J1335XB product is manufactured to genuine Mazda standards, ensuring high durability, stable fuel flow, and full compatibility with Ford Ranger and Mazda BT-50 2013-2018 2.2 and 3.2 engines.

Product information

Product name: In-tank fuel pump / Fuel Tank Pump Assembly
Part number: UC2J1335XB/ AB3Z9H307C/ AB399H307EC
Brand: Genuine Mazda
Applicable vehicles:

• Ford Ranger 2.2 2013-2018
• Ford Ranger 3.2 2013-2018
• Mazda BT-50 2.2 2013-2018
• Mazda BT-50 3.2 2013-2018

Installation location: Inside the fuel tank
System: Diesel fuel system
Condition: New

Functions and role

• Draws fuel from the tank.
• Supplies fuel to the high-pressure pump at a stable flow rate.
• Maintains fuel pressure to specification.
• Helps the engine start quickly and run smoothly.
• Protects the Common Rail fuel injection system.

Key benefits

• Genuine Ford/Mazda part.
• Powerful and durable pump motor.
• Accurate fuel flow and pressure.
• Diesel-resistant, corrosion-resistant materials.
• Installs to original equipment standards.

Signs it needs inspection or replacement

• Engine is hard to start or will not start.
• Vehicle loses power during acceleration.
• Engine stalls suddenly.
• Fuel pump noise becomes unusually loud.
• Fuel system warning light or low fuel pressure warning.

👉 The in-tank fuel pump is an important part of the Diesel fuel system and directly affects engine performance. Using the genuine UC2J1335XB in-tank fuel pump for Ford Ranger, Mazda BT-50 2013-2018 2.2/3.2 helps ensure a stable fuel supply, protect the high-pressure pump and injectors, and maintain optimal operating performance.

Replacement recommendations

• Replace with the correct UC2J1335XB part number for the vehicle and engine.
• Inspect the in-tank strainer and fuel filter at the same time.
• Clean the fuel tank if excessive contamination is found.
• Check fuel pressure after installation.
• Installation is best carried out at a garage or repair center with specialist expertise to ensure the fuel system operates accurately and reliably.