Ford Laser 1.6 Ignition Wire Set 2000–2005 ZL0118140

The Ford Laser 1.6 ignition wire set, part number ZL0118140, is part of the engine ignition system. It carries high voltage from the ignition coil to the spark plugs to create a spark and support combustion of the air-fuel mixture in the cylinders.

When choosing an ignition wire set for a Ford Laser 1.6, check part number ZL0118140 against the VIN and the actual engine configuration to confirm compatibility.

Product Information

Product name: Ford Laser 1.6 ignition wire set

Part number: ZL0118140

Part type: Ignition wire set

Vehicle: Ford Laser

Engine: 1.6L

Model years: 2000–2005

Installation location: Engine ignition system

Part description: High-voltage wires to the spark plugs

Condition: New

Compatibility

Ignition wire set ZL0118140 is listed for the 2000–2005 Ford Laser with a 1.6 engine.

Actual compatibility may vary depending on the engine version and ignition system configuration. Provide the VIN or the part number from the existing ignition wire set so compatibility can be checked before ordering.

Function of the Ignition Wire Set

The ignition wire set carries high voltage from the ignition coil to the spark plugs in the engine's firing order. It helps the ignition system deliver the energy needed to create a spark in each cylinder.

An ignition wire set that meets specifications helps:

• Deliver high voltage to the spark plugs consistently.

• Support the engine's ignition process.

• Reduce engine misfires caused by damaged wires.

• Support steady engine operation during starting and acceleration.

Part Features

The ignition wire set must match the ignition system design for the specific engine version. Wire lengths, spark plug boots, and connections to the ignition coil must suit the actual installation points.

Check the following when choosing a set:

• Wire lengths and the number of wires in the set.

• Connector types for the ignition coil and spark plugs.

• Electrical insulation of the wire coverings.

• Resistance to heat in the engine bay.

Choosing the correct part number helps reduce the risk of loose connections, high-voltage leakage, or an unsuitable fit.

Applicable Vehicle

Ignition wire set ZL0118140 is listed for:

- Ford Laser 1.6 2000–2005.

Model-year information is provided for reference only. Check the part number or provide the VIN to confirm that the ignition wire set suits your vehicle's version.

Replacement Recommendations

When replacing the ignition wire set, also check the condition of the spark plugs and ignition coil for issues that could affect engine ignition.

If the vehicle vibrates or jerks, is difficult to start, misfires, or accelerates poorly, inspect the ignition system to identify the cause. During installation, route the wires correctly, secure the connectors firmly, and keep the wires away from excessively hot surfaces.

Check Compatibility Before Ordering

Provide the VIN or the part number from the existing ignition wire set so Phong Thinh can check compatibility.

Checking part number ZL0118140, the 1.6 engine, and model years 2000–2005 helps reduce the risk of choosing the wrong part and confirm that the ignition wire set suits your Ford Laser.