Ford Escape 2.3 Outer CV Joint 2005–2013 FD022

Ford Escape 2.3 Outer CV Joint 2005-2013 FD022 is fitted to the outer end of the axle shaft, connecting to the wheel hub and transferring rotational force from the drivetrain to the wheel. The constant velocity joint allows torque to be transmitted steadily even as the wheel turns or the suspension moves.

During use, the outer CV joint may wear on its internal contact surfaces, particularly if the vehicle is frequently driven on rough roads or the CV boot is torn, allowing grease to escape and dirt to enter. These factors can reduce smoothness and precision in power transfer.

Outer CV joint part number FD022 is used to look up parts for the 2005–2013 Ford Escape with a 2.3L engine. Before replacement, check the drivetrain configuration, spline count, and fitting dimensions to ensure the joint matches the vehicle’s axle shaft and wheel hub.

Product Information

• Product name: Outer CV Joint

• Part number: FD022

• Brand: TOK

• Vehicle: Ford Escape

• Engine: 2.3L

• Model years: 2005–2013

• Installation location: Outer end of the axle shaft, at the wheel

• System: Drivetrain

• Part type: Outer constant velocity joint

• Condition: New

Function and Role

The outer CV joint transfers torque to the driven wheel while allowing the axle shaft to change its operating angle as the suspension moves and the wheels turn.

Its main functions include:

• Transferring rotational force from the axle shaft to the wheel hub.

• Maintaining torque transfer as the wheel changes steering angle.

• Supporting continuous wheel operation under different driving conditions.

• Working with the CV boot and lubricating grease to protect the internal components of the constant velocity joint.

Key Benefits

• Part number FD022 helps identify an outer CV joint for the Ford Escape 2.3L.

• Helps restore power transfer at the outer end of the axle shaft when the existing joint is worn or damaged.

• Helps maintain stable wheel movement during acceleration and steering.

• Suitable for drivetrain repairs after confirming the correct fitment specifications.

Signs It May Need Inspection or Replacement

The outer CV joint may need inspection if you notice any of the following:

• Clicking noises near the wheel when turning sharply at low speed.

• Unusual vibration during acceleration.

• A torn or cracked CV boot, or leaking lubricating grease.

• Noise from the CV joint or excessive play during inspection.

• Unstable power transfer due to wear in the constant velocity joint.

These symptoms may also be related to the axle shaft, wheel hub, or other drivetrain components. Have the vehicle inspected to identify the cause before replacing any parts.

Replacement Recommendations

• Check the CV boot, grease level, and axle shaft condition before installation.

• Compare the spline count, diameter, and connection type of the new CV joint with the existing part.

• Follow the correct service procedure and tightening torque specified in the vehicle repair instructions.

• Check for noise and confirm proper power transfer after installation.

Check Compatibility Before Ordering

To select the correct outer CV joint for a 2005–2013 Ford Escape 2.3, part number FD022, provide the VIN or the number on the existing part for verification. Checking the drivetrain configuration and connection specifications can help avoid confusion between vehicle versions.