Chevrolet Spark Engine Underbody Splash Shield 2012–2018, 94550247

Engine underbody splash shield is a protective part installed beneath the front of the vehicle. It helps limit mud, rainwater and small road debris from entering the engine bay. This component also helps protect parts underneath the vehicle from external environmental impacts.

During use, the shield may crack, break, warp or come loose at its mounting points due to impacts with raised surfaces, stones and rough roads. If it is damaged or not securely fitted, its protective coverage may be reduced, and rubbing noises may come from underneath the vehicle.

Part number 94550247 is listed for lookup as an engine underbody splash shield for the 2012–2018 Chevrolet Spark. Since a part number may be used across different vehicle models or versions, check the VIN and the number on the old part before confirming compatibility.

Product information

• Product name: Engine underbody splash shield / Engine Underbody Splash Shield

• Part number: 94550247

• Vehicle: Chevrolet Spark

• Model years: 2012–2018

• Installation location: Front underbody, beneath the engine bay

• System: Body and underbody protection

• Part condition: New

Function and role

The engine underbody splash shield helps protect the area beneath the engine bay and limit direct exposure to the road.

• Helps limit mud, water and dirt from splashing onto components underneath the vehicle.

• Reduces the risk of small debris contacting the front underbody area.

• Helps shield and finish the underside of the engine bay.

• Maintains its protective function when correctly positioned and securely fastened.

Key benefits

• Part number 94550247 makes it easier to look up and verify the part.

• Can be checked as a replacement when the existing shield is damaged.

• Helps restore protection for the front underbody area.

• Helps limit mud and water from splashing onto components beneath the engine bay.

Signs it may need inspection or replacement

Inspect the Chevrolet Spark engine underbody splash shield if you notice any of the following:

• The shield is cracked, broken or deformed after an impact.

• Screws or retaining clips are missing or loose, leaving the shield unsecured.

• Rubbing or impact noises come from the front underbody area.

• The shield is sagging or has shifted from its original mounting position.

These symptoms may also be related to other underbody components. Have the vehicle inspected to identify the exact cause before replacing any parts.

Replacement recommendations

Before installation, inspect the screw mounting points, retaining clips and areas where the shield meets surrounding components. If the shield was damaged by an impact, also check the front underbody area for related damage.

Check compatibility before ordering

To identify the correct engine underbody splash shield for your Chevrolet Spark, provide the VIN or the part number on the old component. Phụ Tùng Ô Tô Phong Thịnh can help look up and verify the information before you order to help avoid confusion between different part versions.